How to Install Tri-Proof LED Light

Tri-proof Light stands for light fittings with three features: Corrosion-proof, Dust-proof, and Waterproof. It is also called vapor-tight/proof or waterproof light. To avoid the risk of fire, explosion, or electric shock, damp-proof lights should be installed, inspected, and maintained by a qualified electrician only, in accordance with all applicable electrical codes. Here is the guide to installing non-corrosive LED lights.

2 Methods to Mount Tri-Proof LED Light

1. Suspended installation

Step 1. Turn off the main power supply. Pick the desired position and drill the hole. Screw the steel cable onto the ceiling.

Step 2. Hang the fixture and secure the fixture with steel cable.

Step 3. Adjust the position of the fixture until level. Then connect the light’s wire to ac power and turn on the power.

2. Ceiling Surface Mounted

Step 1. Pick the desired position and drill the hole.

Step 2. Screw the clips to the ceiling using the parts from the package. Then install the lamp into the clips.

Step 3. Adjust the position of the fixture until level.

How to Wiring Tri-Proof Lights

Release the clip to open the light and unscrew the gland on one end of the light fixture. Then connect the live, neutral, and ground wires as directed in the diagram above.